Slideshow Items
MTN PRO Plastic Primer 400ml
ATTENTION! THE DELIVERY OF THE CANS IS DONE EXCLUSIVELY BY COLISSIMO.
Transparent primer in 400ml aerosol can. It is based on a special additive solution that allows the paint to adhere to low-porosity surfaces such as polished metals or untreated plastics.
- Very fast drying
- Easy to apply
- Excellent adhesion
Can be applied as an anchor coat for spray paint Can be applied to difficult surfaces: polished metals and plastics, including polypropylene.
Recommended for: decoration, DIY, gardening and industry
- Clean and degrease the object to be painted.
- Remove corrosion with a wire brush.
- Shake the container vigorously for about 1 minute until you hear the sound of mixing balls.
- Spray with the container in a vertical position, in quick and fine passes at a distance of 25cm. Apply thin coats for best results; several thin coats of paint are better than one thick one.
- Allow each coat to dry for approximately 10 minutes.
- Ready to paint after 10 minutes.
- When finished, turn the container upside down and spray for a few seconds in this position, until the paint stops coming out of the nozzle, thus avoiding clogging.
Do not use on energized equipment and apply in well ventilated areas.
Carousel items
You cart is currently empty