ATTENTION ! THE DELIVERY OF THE CANS IS EXCLUSIVELY BY COLISSIMO.

THE classic spray can thanks to its sustained pressure, its covering power and its brilliant color palette... Often copied but never equaled!

High flow valve: wide and powerful jet.

Glossy finish.

Immediate drying paint without dripping.

High covering power (allows to cover more surface with only one spray can).

Unaltered operation even in very cold weather. 

The can is supplied with an original cap.

Depending on your needs, use a Hardcore skinny cap for a line of only a few millimeters, a skinny pro cap for a fine but soft and adjustable line, a Hardcore medium cap for a medium contour line, a super fat cap for a wide line and finally a Hardcore fat cap to obtain a very wide spray.

Clean and degrease the surface or object to be painted.

On metals: remove corrosion with a wire brush and apply an antioxidant primer if necessary.

On plastics and polyesters, apply a coat of Plastic Primer.

Shake container vigorously. Continue for approximately 1 minute as soon as the sound of mixing beads is heard.

Hold the container in an upright position. Spray in quick, thin strokes at a distance of about 25 cm. Let dry 10 minutes between each coat.

When finished, turn the container upside down and spray for a few seconds in this position, until the paint stops coming out of the nozzle, thus avoiding clogging.

Do not use on energized equipment and apply in well ventilated areas.