Properties :

QUALITY: transparent, intense and high gloss colors.

In solvent phase, ready to use.

Miscible between them.

Good lightfastness. Can be used with Cerne Relief.

DRYING TIME: 2 hours on the surface, 10 hours in the middle. Drying time may vary depending on the thickness of the layer applied, the temperature and humidity of the room where the product is applied.

SUBSTRATE : glass, polyester, plexiglass, acetate...

DILUTION : odorless mineral spirit or white spirit.

MAINTENANCE (of decorated surfaces) : after drying, colors can be lightly washed by hand without soaking. Resistant to glass cleaners. Objects decorated with Vitrail colors cannot be considered as utilitarian objects, but only decorative and only surfaces not intended to be put in contact with food can be decorated.

APPLICATION TOOLS: Pebeo brushes.

CLEANING THE BRUSHES: odorless mineral spirits or white spirit then rinse with soapy water.

NUMBER OF COLORS: 37 colors.

CONSUMPTION: 45 ml = 0.5m².

Applications :

Pebeo's Vitrail colors can be applied with a brush on most transparent surfaces carefully degreased.

The 37 Vitrail colors, with an "antique" and "trendy" appearance, are dense and very transparent.

The decorated surface has a good hardness.

To perfectly imitate stained glass, use these colors with Cerne Relief. They are applied directly to the tube to draw the patterns before applying the Vitrail colors.

The Vitrail colors can also be used in the vat technique and are ideal for mixed techniques.
MIXEDMEDIA by Pebeo.

Before using Gedeo Glazing Resin, it is recommended to apply a coat of Bindex (8 hours drying time) on the Vitrail colors that are well dried (72 hours minimum).

Reference 050014 Designation Yellow ASTM I/***

I/*** Very solid

II/** Solid

III/* Low solid